Maxim DS33Z41 Dokumentacja Strona 93

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 167
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 92
DS33Z41 Quad IMUX Ethernet Mapper
93 of 167
Register Name:
LI.TPPSR
Register Description:
Transmit Packet Processor Status Register
Register Address:
0C8h
Bit # 7 6 5 4 3 2 1 0
Name — — — — — — — TEPF
Default 0 0 0 0 0 0 0 0
Bit 0: Transmit Errored Packet Insertion Finished (TEPF). This bit is set when the number of errored packets
indicated by the TPEN[7:0] bits in the TEPC register have been transmitted. This bit is cleared when errored
packet insertion is disabled, or a new errored packet insertion process is initiated.
Register Name:
LI.TPPSRL
Register Description:
Transmit Packet Processor Status Register Latched
Register Address:
0C9h
Bit # 7 6 5 4 3 2 1 0
Name — — — — — — — TEPFL
Default — — — — — — — —
Bit 0: Transmit Errored Packet Insertion Finished Latched (TEPFL). This bit is set when the TEPF bit in the
TPPSR register transitions from zero to one.
Register Name:
LI.TPPSRIE
Register Description:
Transmit Packet Processor Status Register Interrupt Enable
Register Address:
0CAh
Bit # 7 6 5 4 3 2 1 0
Name — — — — — — — TEPFIE
Default 0 0 0 0 0 0 0 0
Bit 0: Transmit Errored Packet Insertion Finished Interrupt Enable (TEPFIE). This bit enables an interrupt if
the TEPFL bit in the LI.TPPSRL register is set.
0 = interrupt disabled
1 = interrupt enabled
Przeglądanie stron 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 166 167

Komentarze do niniejszej Instrukcji

Brak uwag